Abbaspour K. C., Johnson A.C. and Van Genuchten T. H. M. (2004). Estimating uncertain flow and transport parameters using a sequential uncertainty fitting procedure. Vadose Zone J., 3, 1340–1352.
Abbaspour K. C., Yang J., Maximov I., Siber R., Bogner K., Mieleitner J., Zobrist J. and Srinivasan R. (2007). Modelling hydrology and water quality in the pre-alpine/alpine Thur watershed using SWAT. J. Hydrol., 333, 413-430.
Behmanesh J., Jabari A., Montaseri M. and Rezaei H. (2014). Comparing AWBM and SimHyd models in rainfall-runoff modeling (Case study: Nazlou Chay catchment in west Azarbijan). Geogr. Environ. Plan., 52(4), 155–168 [In Persian].
Boughton, W. C. (1993). A hydrograph-based model for estimating the water yield of ungauged catchments. In: Proceedings of the 1993 Hydrology and Water Resources Symposium, Institution of Engineers, Australia, National Conference Publication, 93(14), 317–324.
Boughton W. (2009). A new approach to calibration of the AWBM for use on ungauged catchments. J. Hydrol. Eng., 14, 562–574.
Goodarzi M., Zahabioun B., Mesah Bowani A. and Kamal A. (2013). Evaluation of three SWAT, IHACRAS, and Hydrological models in runoff simulation in Ghareh Sou Basin. J. Water Drain. Manag., 1, 25–40 [In Persian].
Hosseini M. (2011). Effect of Landuse Changes on Surface runoffand Suspended Sediment Yield of Taleghan Catchment, Iran. PhD Thesis, UPM University, Serdang, Malaysia, 210 pp.
Hosseini M. (2014). Water balance simulation of Garahsou basin of Kermanshah province by using SWAT model. J. Watershed Eng.Manag., 6, 63–73 [In Persian].
Hosseini M. and Ashraf M.A. (2015). Application of the SWAT Model for Water Components Separation in Iran. Springer, 97–98.
Hosseini M., Ghafouri M., Tabatabaei M., Goodarzi M. and Mokarian Z. (2016). Estimating hydrologic budgets for six Persian Gulf watersheds, Iran. Appl. Water Sci., 7, 1–10.
Kult J., Choi W. and Choi J. (2014). Sensitivity of the Snowmelt Runoff model to snow covered area and temperature inputs. Appl. Geogr., 55, 30–38.
Lang J., Schick A.P. and Leibundgut C. (1999). A noncalibrated rainfall-runoff model for large, arid catchments. Water Resour. Res., 35(7), 2126–2177.
Li L., Lambert M.F., Holger R.M., Partington D. and Simmons C.T. (2015). Assessment of the internal dynamics of the Australian Water Balance Model under different calibration regimes. Environ. Model. Software., 66, 57–68.
Oeurng C., Sauvage S. and Sanchez-Perez J. M. (2011). Assessment of hydrology, sediment and particulate organic carbon yield in a large agricultural catchment using the SWAT model. J. Hydrol., 401, 145–153.
Podger G. (2004). RRL rainfall runoff library users guide. Cooperative Research Centre for Catchment Hydrology. Available from
http://www.toolkit.net.au.
Romanowici A. A., Vanclooster M., Rounsevell M. and La junesse I. (2005). Sensitivity of the SWAT model to the soil and land use data parameterization. A case study in the Thyle catchment, Belgium. Ecol. Model., 187, 27–39.
Rostamian R., Jaleh A., Afyuni M., Mousavi S. F., Heidarpour M., Jalalian A. and Abbaspour K. C. (2008). Application of a SWAT model for estimating runoff and sediment in two mountainous basins in central Iran. J. Hydrol., 53, 977–988.
Sommerlot A., Nejadhashemi A., Woznicki S., Giri S. and Prohaska M. (2013). Evaluating the capabilities of watershed-scale models in estimating sediment yield at field-scale. J. Environ. Manag., 127, 227-236.
Tahmasebi R., Sharifi F., Kaveh F. and Tavassoli A. (2010). Designing of rainwater collecting systems in micro catchment by using AWBM Model for cultivating of forage maize SC704. J. Range Watershed Manag., 63(3), 359–373 [In Persian].
Zarin H., Moghaddamnia A. R., Nam Dorost J. and Mosaedi A. (2013). Simulation of outlet runoff in ungauged catchments by using AWBM Rainfall-Runoff Model. J. Water Soil Conserv., 20(2), 195–208 [In Persian].
)