American Society for Testing & Materials (ASTM). (1995).
American Standard test method for indirect tension test for resilient modulus of bituminous mixtures. D4123. West Conshohocken, USA,
https://www.astm.org/standards/d4123
American Society for Testing & Materials (ASTM), (2017).
Standard guide for small-scale environmental chamber determinations of organic emissions from indoor materials/products. D5116-17, West Conshohocken, USA, DOI:
10.1520/D5116-17
Arshad, A. K., Ahmad, J., & Masri, A. K. (2016). Rutting resistance of nanosilica modified porous asphalt. Int. J. Civil Eng. Tech., 10(1), 2374-2284.
Badroodi, S. K., Keymanesh, M. R. & Shafabakhsh, G. (2020). Experimental investigation of the fatigue phenomenon in nano silica-modified warm mix asphalt containing recycled asphalt considering self-healing behavior.
J. Construct. Build. Mater.,
246, 117558, DOI:
10.22075/JRCE.2019.17478.1331
Cao, B., Zho, J., Li. A., & Sun. M. (2022). Laboratory investigation on influence of mixture parameters on noise reduction characteristics of porous asphalt concrete.
Int. J. Pavement. Eng., DOI:
10.1080/10298436.2022.2092619
Dispat, N. Poompradub, S, S. & Kiatkamjornwong, S. (2020). Synthesis modified starch-graft-polyacrylate superabsorbent polymer for agricultural application
. J. Carbohyd. Polymer,
249. 116862. DOI:
10.1016/j.carbpol.2020.116862
Jiang, W., A. Sha, A., Xiao, J., Li, Y. & Huang, Y. (2015). Experimental study on filtration effect and mechanism of pavement runoff in permeable asphalt pavement.
J. Construct. Build. Mater.,
100, 102-110. DOI:
10.1016/j.conbuildmat.2015.09.055.
Kamboozia, N. & Mousavi Rad., S. (2022). Laboratory investigation of the effect of nano-ZnO on the fracture and rutting resistance of porous asphalt mixture under the aging condition and freeze–thaw cycle.
J. Mater.
Civil Eng.,
34(5), DOI:
10.1061/(ASCE)MT.1943-5533.000418
Kandhal, P. S. & Mallick, R. B. (1999). Design of new-generation open-graded friction courses. National Center for Asphalt Technology.
Li, R., Xiao, F., Amirkhanian, S., You, Z. & Huang, J. (2017). Developments of nano materials and technologies on asphalt materials-A review.
Construct. Build. Mater.,
143, 633-648. DOI:
10.1016/j.conbuildmat.2017.03.158
Mousavi Rad, S., Ameri, M. & Kamboozia, N. (2021). Feasibility of simultaneously improving the ability to absorb pollutants from surface runoff and the mechanical performance of pavements by using porous asphalt mixture modified with photocatalyst nanomaterials. M.E. Dissertation. Iran University of Science and Technology, Tehran, Iran [In Persian].
Ma, X., Li, Q., Cui, Y. C. & Ni, A. Q. (2018). Performance of porous asphalt mixture with various additives
. Int. J. Pavement. Eng.,
19(4), 355-361, DOI:
10.1080/10298436.2016.1175560
Parvin Nia, M., Rakhshandeh Rou, G. & Manjemi, P. (2007). Investigation of the quality and restoration of urban floods in Shiraz City, 2nd Conf. exhibition of environmental engineering of the university of Tehran, Tehran, Iran [In Persian].
Rocha Segundo, I., Dias, E., Fernandez, F., Freitas, E., Costa, M., & Carneiro, J. O. (2019) Photocatalytic asphalt pavement: the physicochemical and rheological impact of TiO
2 nano/microparticles and ZnO microparticles onto the bitumen.
J. Road Mater. Pavement Design.,
20(6), 1452-1467, DOI:
10.1080/14680629.2018.1453371
Roseen, R. M., Ballestero, T. P., Houle, J. J. & Avellaneda, P. (2009). Seasonal performance variations for storm-water management systems in cold climate conditions.
J. Environ. Eng.,
135, 128–137, DOI:
10.1061/(ASCE)0733-9372(2009)135:3(128)
Shafabakhsh, G. Jafari Ani, O., & Mirabdolazimi, S. M. (2021). Rehabilitation of asphalt pavement to improvement the mechanical and environmental properties of asphalt concrete by using of nanoparticles.
J. Rehabilit. Civil Eng.,
9(2), 1-20. DOI:
10.22075/JRCE.2019.17407.1326
Slebi-Acevedo, C. J., Lastra-González, P., Indacoechea-Vega, I., & Castro-Fresno, D. (2020). Laboratory assessment of porous asphalt mixtures reinforced with synthetic fibers
. J. Construct. Build. Mater.,
23(4), 117-224. DOI:
10.1016/j.conbuildmat.2019.117224
Tanzadeh, J., Tanzadeh, R., Nazari, H. & Kamvar, N. (2017). Fatigue evaluation of hot mix asphalt (HMA) mixtures modified by optimum percent of TiO
2 nanoparticles.
J. Adv. Eng. Forum,
1, 55-62, DOI:
10.4028/www.scientific.net/AEF.24.55
Watson, D. E., Masad, E., Ann Moore, K., Williams, K., & Cooley, L. A. (2004). Verification of voids in coarse aggregate testing: determining stone-on-stone contact of hot-mix asphalt mixtures
. J. Transport. Res. Record.,
1891(1), 182-190. DOI:
10.3141/1891-21
West, R.C., Rodezno, C., Leiva. F., & Taylor. A. J. (2018). Regressing air voids for balanced HMA mix design [Final report]. Accessed on 12.02.2022 available at:
https://rosap.ntl.bts.gov/view/dot/40787
Yu, H, Dai, W, Qian, G., Gong, X., Zhou, D., Li, X. & Zhou, X. (2020) The NOx degradation performance of nano-TiO
2 coating for asphalt pavement.
J. Nanomater., 10(5), 897. DOI:
10.3390/nano10050897
Zhang, K., Anupam, A., Scarpas, C. & Kasbergen, S. (2020). Effect of stone-on-stone contact on porous asphalt mixes, micromechanical analysis.
Int. J. Pavement Eng.,
21(8), 990-1001. DOI:
10.1080/10298436.2019.1654105