@article { author = {Samiei, Fatemeh and Ghadi, Arezoo and Masoumi, Mojtaba}, title = {Adsorption of Edifenphos pesticide using polypyrrole modified zeolite composite}, journal = {Environment and Water Engineering}, volume = {7}, number = {2}, pages = {243-254}, year = {2021}, publisher = {Iranian Rainwater Catchment Systems Association}, issn = {2476-3683}, eissn = {2476-3683}, doi = {10.22034/jewe.2021.252797.1467}, abstract = {Today, due to the growing population and increasing agricultural and food production, the use of toxins and organophosphate and organochlorine pesticides, especially Edifenphos, is increasing in the agricultural sector. One of the most effective ways to remove such toxins is to use the adsorption method. Therefore, the present study investigated the removal of Edifenphos fungicide from aqueous solution using polypyrrole composite on natural perlite zeolite. It is notworthy that each experiment was performed in a discontinuous system. For this purpose, after removing possible impurities in perlite through heating at 550 °C and then activating perlite with 0.06 N sulfuric acid, PPy/perlite nanocomposite was prepared. The structure of the adsorbents synthesized was identified using X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) spectroscopy. Then, the effect of experimental parameters of pH, contact time, adsorbent mass, and temperature on adsorption was studied. The results showed that the optimal conditions for adsorption of Edifenphos by PPy/Perlite were pH 6, contact time 18 min, and adsorbent amount of 0.3 g/100 ml. Examination of the effect of temperature also showed that increasing the temperature has a positive effect on the removal efficiency. Finally, the study of the process thermodynamics showed a spontaneous and endothermic process.}, keywords = {Adsorption,Edifenphos fungicide,polymer composite,Thermodynamics}, title_fa = {جذب آفت کش ادیفنفوس با استفاده از کامپوزیت زئولیت اصلاح شده با پلی پیرول}, abstract_fa = {امروزه به­دلیل رشد روز افزون جمعیت و افزایش تولیدات کشاورزی و مواد غذایی، استفاده از سموم و آفت­کش­های اورگانوفسفره و اورگانوکلره مخصوصا ادیفنفوس در بخش کشاورزی درحال افزایش است. یکی از مؤثر ترین روش ها برای حذف چنین سمومی استفاده از روش جذب سطحی است. از این­رو، پژوهش حاضر به بررسی حذف قارچ­کش ادیفنفوس از محلول آبی به کمک کامپوزیت پلی پیرول بر روی زئولیت طبیعی پرلیت پرداخت. لازم به­ذکر است تمامی آزمایش ها در سیستم ناپیوسته صورت گرفت. برای این منظور، پس از حذف ناخالصی­های احتمالی در پرلیت از طریق حرارت­دادن در دمای C° 550 و سپس فعال‌سازی پرلیت با سولفوریک اسید N 06/0، نانوکامپوزیت PPy/perlite تهیه شد. شناسایی ساختار جاذب­های سنتز شده به­وسیله آنالیز پراش اشعه ایکس (XRD)، میکروسکوپ الکترونی روبشی (SEM)، و طیف سنجی تبدیل فوریه مادون قرمز (FTIR) انجام گرفت. در ادامه، اثر پارامترهای تجربی  pH، زمان تماس، مقدار جرم جاذب و دما بر جذب سطحی مورد مطالعه قرار گرفت. نتایج نشان داد که شرایط بهینه جذب ادیفنفوس به­وسیلهPPy/Perlite ، 6 pH ، زمان تماس min 18 و میزان جاذب g 3/0 در ml 100 بوده است. بررسی اثر دما نیز نشان داد که افزایش دما تاثیر مثبت در راندمان حذف دارد. در نهایت، بررسی ترمودینامیک فرآیند نیز نشان­دهنده یک فرآیند خود به­خودی و گرماگیر بود.}, keywords_fa = {Adsorption,Edifenphos fungicide,polymer composite,Thermodynamics}, url = {http://www.jewe.ir/article_126835.html}, eprint = {http://www.jewe.ir/article_126835_f2a071421ea53f35016bb597855327d1.pdf} }