@article { author = {Davoudi Rad, Ali and Hejri, Zahra and Ramezanian Bajgiran, Sadegh}, title = {Adsorption Optimization of Reactive Red 120 Dye from Aqueous Media using Chitosan-Coated Magnetically Nanoparticles}, journal = {Environment and Water Engineering}, volume = {5}, number = {1}, pages = {47-57}, year = {2019}, publisher = {Iranian Rainwater Catchment Systems Association}, issn = {2476-3683}, eissn = {2476-3683}, doi = {10.22034/jewe.2019.149047.1280}, abstract = {In this study, chitosan-coated magnetically nanoparticles were used to remove the Reactive Red 120 dye from aqueous solution. Chitosan is one of the most famous biological polymers that can be used as adsorbent in the removal of color pollutants. Magnetic Fe3O4 nanoparticles synthesized by mixing FeCl3.6H2O and FeCl2.4H2O were coated on low molecular weight chitosan polymer. Magnetic nanoparticles coated with chitosan were then characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD) and vibrating sample magnetomer (VSM) analysis. The effect of three parameters of pH, dye concentration, and the adsorbent dosage on adsorption was investigated. Under these conditions, the optimal adsorption was obtained ​​at pH = 4, initial dye concentrations = 150 mg/l, and the adsorbent dosage of 2 g/l. Adsorption data were adapted to Langmuir and Freundlich isothermic models. The results showed that the data obtained from the dye adsorption on the chitosan-coated magnetically nanoparticles fit better with Langmuir model.}, keywords = {Adsorption,Azodye,Chitosan,Freundlich,Langmuir,Wastewater}, title_fa = {بهینه سازی جذب سطحی رنگزای آزوی Red 120 Reactive از محلول آبی با استفاده از نانوذرات مغناطیسی پوشش داده شده با کیتوزان}, abstract_fa = {در این پژوهش از نانوذرات مغناطیسی پوشش­ داده ­شده با کیتوزان به ­منظور حذف رنگ‌زای آزوی Red 120 Reactive از محلول­ آبی استفاده شد. کیتوزان از معروف­ترین پلیمرهای زیستی است که می ­تواند به­ عنوان جاذب در حذف آلاینده‌های رنگی به­ کار رود. نانوذرات مغناطیسی Fe3O4 از ترکیب همزمان FeCl3.6H2O و FeCl2.4H2O، سنتز و با پلیمر کیتوزان با جرم مولکولی پایین، پوشش داده شدند. نانوذرات مغناطیسی پوشش ­داده­شده با کیتوزان سپس با کمک آنالیز‌های میکروسکوپ الکترونی روبشی (SEM)، میکروسکوپ الکترونی عبوری (TEM)، تابش مادون قرمز (FTIR)،  پراش پرتو ایکس (XRD) و مغناطیس سنجی ارتعاشی (VSM) مشخصه‌یابی شدند. در ادامه اثر سه پارامتر pH، غلظت رنگ‌زا و دوز جاذب بر روی میزان جذب مورد بررسی قرار گرفت. تحت این شرایط مقادیر بهینه جذب در pH برابر 4، غلظت اولیه رنگ‌زای آزو برابر  mg/l150 و مقدار جاذب برابر  g/l2 به ­­دست آمد. داده‌های جذب سطحی با مدل‌های هم‌دمای لانگمویر و فروندلیچ تطبیق داده شدند. نتایج به­ دست آمده نشان داد که داده‌های حاصل از جذب رنگ‌زای مورد نظر بر روی نانوذرات مغناطیسی کیتوزان با مدل لانگمویر تطبیق بیشتری دارد.}, keywords_fa = {پساب,جذب سطحی,رنگ‌زای آزو,فروندلیچ,کیتوزان,لانگمویر}, url = {http://www.jewe.ir/article_85412.html}, eprint = {http://www.jewe.ir/article_85412_33036a89cf9cd4c3ede9f9f45ab44502.pdf} }