@article { author = {Salehi, Mostafa and Farhadi, Alireza and Khani Temeliyeh, Zabihollah and Ahmadpoor, Zaher}, title = {Numerical Modeling of Waves Caused by Mortar Checkdam Break in Nooshan Sub-Basin, West Azarbaijan, Iran}, journal = {Environment and Water Engineering}, volume = {4}, number = {2}, pages = {90-100}, year = {2018}, publisher = {Iranian Rainwater Catchment Systems Association}, issn = {2476-3683}, eissn = {2476-3683}, doi = {10.22034/jewe.2018.111452.1216}, abstract = {Modeling the dam break phenomenon is more important in order to calculate the approximate discharge flow due to break to perform the measures to control it or to prevent the resulting hazards. In this research, Gambit software was used to generate the form and dimensions of the geometry of the laboratory model. Then, the generated geometry file was transferred to the Fluent hydraulic model. In Fluent environment, all effective parameters were determined. The VOF method was used for modeling. The case study in this research was the rocky sedimentary located near the Nowshan basin, which is located around Urmia city, and the dam break modeling was done for it in a three-dimensional characteristic. The results obtained from the laboratory conditions were compared with the results of the Fluent model, which is related to modeling the dam break phenomenon in two-dimensional form. Various wave characteristics were studied, including wave propagation, wave velocity, and water depth variation at the bottom of the dam in dry and wet bed conditions. Comparison of the results shows that the Fluent model has high accuracy in modeling the flow due to dam break. To construct the geometry of a part of the stream that includes the reservoir and the reservoir, a topographic map of the stream was used in AutoCAD environment.}, keywords = {Dam Break,Fluent,Modeling,Gambit}, title_fa = {مدل‌سازی عددی امواج ناشی از شکست سد سنگی-ملاتی در زیرحوضه نوشان آذربایجان غربی}, abstract_fa = {مدل‌سازی پدیده شکست سد بیشتر به‌منظور محاسبه تقریبی دبی پیک خروجی ناشی از شکست انجام تا  تمهیداتی برای مهار آن یا برای پیشگیری از خطرات ناشی از آن در نظر گرفته شود. در این پژوهش از نرم‌افزار Gambit برای تولید فرم و ابعاد هندسه مدل آزمایشگاهی استفاده شد. سپس فایل هندسه تولید شده به مدل هیدرولیکی Fluent منتقل شد. در محیط Fluent  کلیه پارامترهای مؤثر و مورد نیاز تعیین گردید. از روشVOF برای مدل‌سازی استفاده شد. مطالعه موردی در این تحقیق سد سنگی ملاتی آبخیزداری در زیر حوضه نوشان که در اطراف شهرستان ارومیه می‌باشد و مدل‌سازی شکست سد برای آن به‌صورت سه‌بعدی انجام گرفت.  نتایج به‌دست آمده از شرایط آزمایشگاهی با نتایج حاصل از مدلFluent ، که مربوط به مدل‌سازی پدیده شکست سد به‌صورت دو بعدی است، مقایسه شد. مشخصات مختلف موج از جمله پیشروی موج، سرعت موج و تغییرات عمق آب در پایین‌دست سد در حالت‌های بستر خشک و مرطوب مورد بررسی قرار گرفت. مقایسه نتایج نشان می‌دهد که مدل Fluent  دقت بالایی در مدل‌سازی جریان ناشی از شکست سد را دارا می‌باشد. برای ساخت هندسه قسمتی از آبراهه که شامل مخزن و پایاب سد می‌باشد، از نقشه توپوگرافی آبراهه در محیط اتوکد استفاده شد.}, keywords_fa = {شکست سد,Fluent,مدل‌سازی,Gambit}, url = {http://www.jewe.ir/article_68844.html}, eprint = {http://www.jewe.ir/article_68844_2eb03deb8a4c8ea929d36233b5266cfd.pdf} }