نوع مقاله : مقاله پژوهشی
نویسندگان
1 کارشناسی ارشد، آلودگی محیط زیست، موسسه آموزش عالی بهاران گرگان، گرگان، ایران
2 کارشناسی ارشد، آلودگی محیط زیست، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان، ایران
3 استادیار گروه آلودگی محیطزیست، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان، ایران
چکیده
امروزه به علت توسعه سریع صنایع شیمیایی، آلودگی محیطزیست در نتیجه ورود ترکیبات شیمیایی آلی و معدنی و همچنین فلزات سنگین به مشکلی جدی تبدیل شده است. جذب سطحی با استفاده پلیمرهای زیستی(نانوفیبرلیگنوسلولز و نانوفیبرکیتین) فناوری نوینی است که دوستدار محیط زیست برای کاهش و حذف فلزات سنگین از فاضلابهای صنعتی میباشد. هدف از انجام این مطالعه ارزیابی کارایی جاذب نانولیف لیگنوسلولزی (نانوفیبرسلولز حاوی لیگنین و همیسلولزها) در حذف فلزسنگین مس میباشد. درسیستم ناپیوسته پارامترهای pH (8-4)، دوز جاذب (g 5/0-1/0) ، زمان تماس (min 120-15)، غلظت اولیه فلز مس (mg/l 50-5) و درجه حرارت (˚C40-15) بررسی شد. نتایج با تحلیل واریانس یک طرفه (ANOVA) و آزمون دانکن جهت برآورد معنیداری تغییرات پارامترها مورد تجزیه و تحلیل قرار گرفتند. بر اساس نتایج، بیشترین درصد حذف فلز مس در pH برابر 7، غلظت اولیه فلز mg/l 5، مقدار جاذب g/l 3/0 و دمای ˚C 25، برابر mg/g 8/99 مشاهده شد. با توجه به نتایج این تحقیق، از جاذب نانولیف لیگنوسلولزی (با کارایی بالای 98%) برای حذف مس از پسابهای صنایع میتوان استفاده نمود.
کلیدواژهها
موضوعات
عنوان مقاله [English]
Evaluation of Lignocellulose Nanofiber Adsorbent Efficacy in Cu(II) Removal from Aqueous Solutions
نویسندگان [English]
- Syede Homa Hosseini 1
- Saeedeh Rastgar 2
- Hassan Rezaei 3
1 M.Sc. Graduate in Environmental Pollution, Baharan Higher Education Institute, Gorgan, Iran
2 M.Sc. Graduate in Environmental Pollution, Gorgan University of Agricultural Sciences and Natural Resources (GUASNR), Gorgan, Iran
3 Assistant Professor, Department of Environmental Pollution, Gorgan University of Agricultural Sciences and Natural Resources (GUASNR), Gorgan, Iran
چکیده [English]
Nowadays, rapid development of the chemical industry has brought about environmental pollution, a serious threat, as a result of the entry of organic and inorganic chemicals, as well as heavy metals. Surface absorption by the use of biological polymers is a novel environmentally friendly technology for reducing and removing heavy metals from industrial wastewater. The objective of this study was to investigate the performance of lignocellulose nanofiber (LCNFs) adsorbents in the removal of Cu(II) from aqueous media. The test conditions are considered for two completely identical adsorbents. In the batch system, parameters of pH (4-8), adsorbent dosage (0.1- 0.5 g/l), contact time (15-120 min), Cu(II) initial concentration (5-50 mg/l), and temperature (15-40 °C) were studied. The results were analyzed by one-way ANOVA and Duncan's tests for significant evaluation of changes in parameters. Results showed that the highest percentage of removal of Cu(II) (99.8%.) for LCNFs at pH 7, Cu(II) concentration of 10 mg/l, adsorbent dosage of 0.3 g/l, contact time of 60 min at temperature of 25 °C was obtained. This study showed that LCNFs adsorbents are considered as an optimal adsorbent for removal Cu(II) by removing more than 98% of Cu(II) from aqueous solutions.
کلیدواژهها [English]
- Bioadsorbent
- Lignocellulose Nano-fibers
- Cu(II)
- Aqueous solutions